Introduction – Basic operations
This section describes the basic operations to operate the camcorder.
How to turn on the power and select the mode
To supply power for the camcorder, see "Step 1 Preparing the power supply" on page
(1) Slide the POWER switch down while pressing the small green button, then release
(2) Slide the POWER switch down. Each time you slide it down, the mode changes as
The camcorder is turned on, and then the camcorder turns to the CAMERA mode
so that the CAMERA lamp lights up.
follows and corresponding mode lamp also lights up.
CAMERA Use this mode when you record on a tape.
VCR Use this mode when you play back or edit an image recorded on a tape or
Use this mode when you record on a "Memory Stick," or
play back or edit an image in a "Memory Stick."
Use this mode when you use the network
function. For details, refer to the supplied network function