Sony DCR-IP45E Operating Instructions Manual page 107

Dubbing a tape
Using the i.LINK cable
Simply connect the i.LINK cable (optional) to the
i.LINK (MICROMV Interface) of your camcorder
and to the i.LINK (MICROMV Interface) of the
MICROMV product. With digital-to-digital
connection, video and audio signals are
transmitted in digital form for high-quality
editing. (You cannot connect the camcorder to a
DV product.) You cannot dub the titles,
displayed indicators, the contents of Micro
Cassette Memory, or letters on the "Memory
Stick" index screen.
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2)Prepare the VCR for recording.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR. Refer to the
operating instructions of the VCR.
i.LINK (MICROMV Interface)/
: Signal flow/
When you have finished dubbing a
tape
Stop recording on the VCR, and stop playback on
your camcorder.
(1)
(2)
(3)
(4)
(5)
i.LINK cable
(optional)/
DV IN
i.LINK (MICROMV
Interface)/
107