Sony DCR-IP45E Operating Instructions Manual page 113

Recording video or TV
programmes
When you have finished dubbing a
tape
Press on the LCD screen or STOP on the
Remote Commander to stop recording on your
camcorder and stop playback on VCR or TV.
Notes
•When an incompatible picture (such as one
recorded with the DV format) is input, the
message INPUT ERROR appears.
•You can connect one VCR only using the
i.LINK cable.
•First, start playback or turn to the playback
pause mode before the camcorder starts
recording or turns to the recording pause mode.
If no signal is input into the camcorder, the
message NO INPUT appears and the
camcorder cannot start recording.
Note on playback pause pictures
When you record a playback pause picture:
•The recorded picture becomes rough when
recorded through the i.LINK (MICROMV
Interface).
•The picture may jitter when you play back the
tape on other video equipment. And there may
be a time-lag when you play back the tape on
other video equipment.
Before recording
Make sure if the MPEG IN indicator appears on
the LCD screen. The MPEG IN indicator may
appear on both equipment.
113