Viewing images recorded on a
tape on your computer
– For Windows users
If image data cannot be transferred by the
USB connection
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installation of the USB driver was
completed. Reinstall the USB driver following the
procedure on page 201.
If any trouble occurs
Close all running applications, then restart your
computer.
Carry out the following operations after
quitting the application:
– Disconnect the USB cable.
– Change the POWER switch to the other
position or set the POWER switch to OFF
(CHG) on your camcorder.
When operating the following modes, they do
not function for the image to be output, or
the image cannot be output
– Colour Slow Shutter
– Super NightShot
– Digital effect
– MEMORY MIX
212