Table of Contents
Advertisement
Connecting your camcorder to
your computer using the USB
cable – For Windows users
6 Set the POWER switch to OFF (CHG) on your
camcorder, and then disconnect the USB
cable.
7 Restart your computer.
Step 2: Install the USB driver on the supplied
CD-ROM
Perform the entire procedure described in
"Installing the USB driver" on page 201.
Viewing images recorded on a
"Memory Stick"
Step1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows
to load.
2 Insert a "Memory Stick" into your camcorder.
3 Connect the AC power adaptor, and set the
POWER switch to MEMORY/NETWORK
(DCR-IP55E only).
4 Connect the USB connector on your computer
to the
(USB) jack on your camcorder using
the USB cable supplied with your camcorder.
5 Open your computer's "Device Manager".
Windows 2000 Professional:
Select "My Computer" t "Control Panel" t
"System" t "Hardware", and click the
"Device Manager" button.
Other OS:
Select "My Computer" t "Control Panel" t
"System", and click "Device Manager".
6 Select "Other devices".
Select the device prefixed with the "?" mark
and delete.
Ex: (?)Sony Handycam
7 Turn the POWER switch to OFF (CHG) on
your camcorder, and then disconnect the USB
cable.
8 Restart your computer.
Step2: Install the USB driver on the supplied
CD-ROM
Perform the entire procedure described in
"Installing the USB driver" on page 201.
6
7
1
2
3
4
5
6
7
8
t
t
t
t
t
207
Hide quick links:
Advertisement
Table of Contents
