Editing; Dubbing A Tape - Sony DCR-IP45E Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on the VCR connected to
your camcorder using your camcorder as a
player. Connect your camcorder to the VCR
using the A/V connecting cable supplied with
your camcorder. The supplied A/V connecting
cable is equipped with an S video plug and a
video plug. Use either the S video plug or the
video plug depending on the recorder. Do not
connect both of the plugs to the recorder.
Before operation
•Set DISPLAY to LCD in the menu settings. (The
default setting is LCD.)
•Press the following buttons to make the
indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DSPL/TOUCH PANEL
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Prepare the VCR for recording, then set the
input selector to LINE.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your
VCR.
A/V connecting cable(supplied)/
: Signal flow/
(1)
(2)
(3)
(4)
(5)
White/
Red/
Black/
Yellow/
IN
S VIDEO
VIDEO
AUDIO
105