To Display The Screen Indicators - Display Function - Sony DCR-IP45E Operating Instructions Manual

Playing back a tape
To display the screen indicators
– Display function
Press DSPL/TOUCH PANEL on your camcorder
or DISPLAY on the Remote Commander. The
indicators disappear from the LCD screen.
To make the indicators appear, press DSPL/
TOUCH PANEL or DISPLAY again.
Using the data code function
Your camcorder automatically records not only
images on the tape but also the recording data
(date/time or various settings when recorded)
(Data code).
Follow the steps below to display the data code
using the touch panel or the Remote
Commander.
Using the touch panel
(1) In the playback mode, press FN and select
PAGE3.
(2) Press DATA CODE.
(3) Select CAM DATA or DATE DATA, then
press OK.
(4) Press EXIT.
Using the Remote Commander
Press DATA CODE on the Remote Commander
in the playback mode.
The display changes as follows:
date/time t various settings (SteadyShot OFF,
exposure, white balance, gain, shutter speed,
aperture value) t no indicator
Not to display various settings
Set DATA CODE to DATE in the menu settings
(p. 232).
The display changes as follows when you press
DATA CODE on the Remote Commander:
date/time y no indicator
(1)
(2)
DATACODE
OFF OK
CAM DATE
DATA DATA
(3)
(4)
t
t
y
57