Viewing The Recording On Tv - Sony DCR-IP45E Operating Instructions Manual

Viewing the recording
on TV
Connect your camcorder to your TV with the
A/V connecting cable supplied with your
camcorder to watch the playback pictures on the
TV screen. You can operate the playback control
buttons in the same way as when you view
playback pictures on the LCD screen. When
viewing the playback picture on the TV screen,
we recommend that you power your camcorder
from a wall socket using the AC power adaptor
(p. 30). Refer to the operating instructions of your
TV.
Open the jack cover. Connect your camcorder to
the TV with the A/V connecting cable. Then, set
the TV/VCR selector on the TV to VCR.
The supplied A/V connecting cable is equipped
with an S video plug and a video plug. Use either
the S video plug or the video plug depending on
the TV. Do not connect both of the plugs to the
TV.
: Signal flow/
If your TV is already connected
to the VCR
Connect your camcorder to the LINE IN input on
the VCR with the A/V connecting cable supplied
with your camcorder. Set the input selector on
the VCR to LINE.
White/
A/V
A/V connecting
cable (supplied)/
Yellow/
Black/
IN
Red/
S VIDEO
VIDEO
AUDIO
61