Sony DCR-IP45E Operating Instructions Manual page 218

Connecting your camcorder to
your computer using the USB
cable – For Macintosh users
Installing the USB driver
Do not connect the USB cable to your
computer before installation of the USB
driver is completed.
For Mac OS 8.5.1/8.6/9.0 users
(1) Turn on your computer and allow the Mac OS
to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer.
The application software screen appears.
(3) Click the "USB Driver" to open the folder
containing the six files related to "Driver."
(4) Select the following two files, and drag and
drop them into the System Folder.
• Sony Camcorder USB Driver
• Sony Camcorder USB Shim
(5) When the message appears, click "OK."
The USB driver is installed on your computer.
(6) Remove the CD-ROM from the computer.
(7) Restart your computer.
For Mac OS 9.1/9.2/Mac OS X (v10.0/v10.1)
The USB driver need not be installed. Your Mac
is automatically recognized as a drive just by
connecting your Mac using the USB cable.
218
(1)
(2)
(3)
(4)
(5)
(6)
(7)