Sony DCR-IP45E Operating Instructions Manual page 99

Searching for a scene
– MULTI-PICTURE SEARCH
(5) Select the thumbnail you want to play back,
then press EXEC. The camcorder starts
searching for the image or scene and plays it
back automatically. The blue portion of the
bar indicates the scanning range and the
white portion of the bar indicates the
recorded portion.
When you want to change the thumbnail
Press RET, and select the thumbnail you
want to play back again, then press
5
[c] The title/date (The title turns to the date
indication after five seconds.)
[d] The actual point you are trying to search for
(yellow v mark)
[e] The present point on the tape (yellow bar)
OK.
X/x/C/c/EXECUTE buttons/
EXEC POS END
4/ 7/02 12:05
[c]
(5)
EXEC
[d] [e]
[c]
[d]
[e]
X x C c
END
v
99