Recording An Image From A Tape As A Still Image - Sony DCR-IP45E Operating Instructions Manual

Recording an image
from a tape as a still
image
Your camcorder can read moving picture data
from other equipment recorded on a tape and
record it as a still image on a "Memory Stick."
Your camcorder can also take in moving picture
data from other equipment through the input
connector and record it as a still image on a
"Memory Stick."
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press . The picture recorded on the tape
is played back.
(3) Keep pressing PHOTO lightly until the
picture from the tape freezes. CAPTURE
appears on the LCD screen. Recording does
not start yet.
(4) Press PHOTO deeper. The image displayed
on the LCD screen will be recorded on a
"Memory Stick." Recording is complete when
the bar scroll indicator disappears.
2
154
3
PHOTO
(1)
(2)
(3)
(4)
4
SFN
1 / 40
640
CAPTURE
FN
SFN
640
PHOTO
1
CAMERA
MEMORY/
NET-
WORK
VCR
POWER
FN
(CHG)
OFF
ON
MODE