Connecting your camcorder to
your computer using the i.LINK
cable – For Windows users
You can view or edit the images recorded on a
tape using your computer. You can record
images edited with the computer on the tape.
To view images on your computer, the
application software MovieShaker Ver.3.1 for
MICROMV (supplied) and i.LINK cable is
required.
Computer/
Note
To view images on your computer, you have to
install the i.LINK driver and the application
software into your computer. They are included
in the supplied application software
MovieShaker Ver.3.1 for MICROMV.
Before installing the i.LINK driver and the
application software into your computer, be sure
not to connect the camcorder to the computer.
For details on installing and on an i.LINK
connection, refer to the operating instructions
supplied with MovieShaker Ver.3.1 for
MICROMV.
196
i.LINK connector/
i.LINK cable/
i.LINK
(MICROMV
Interface)/