Sony DCR-IP45E Operating Instructions Manual page 160

Superimposing a still image in a
"Memory Stick" on an image
– MEMORY MIX
Recording a superimposed
image to a tape
Before operation
•Insert a tape for recording into your camcorder.
•Insert a "Memory Stick" recorded with still
images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) In the standby mode, press FN and select
PAGE2.
(3) Press MEM MIX. The last image recorded on
the "Memory Stick" appears on the right
lower part of the LCD screen.
(4) Press –/+ on the right lower corner of the
LCD screen to select the still image which you
want to superimpose.
– : to see the previous image
+ : to see the next image
(5) Press a desired mode. The still image is
superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the LCD
screen to adjust the effect, then press
to return to PAGE2.
M. CHROM – The colour (blue) scheme of
M. LUMI
C. CHROM
M. OVERLAP – No adjustment necessary
The fewer bars there are on the LCD screen,
the stronger the effect.
(7) Press EXIT to return to FN.
(8) Press START/STOP to start recording.
160
the area in the still image
which is to be swapped with
a moving image
– The colour (bright) scheme
of the area in the still image
which is to be swapped with
a moving image
– The colour (blue) scheme of
the area in the moving image
which is to be swapped with
a still image
(1)
(2)
(3)
(4)
OK
(5)
(6)
(7)
(8)