Using The Spot Focus Mode - Spot Focus - Sony DCR-IP45E Operating Instructions Manual

Using the spot focus
mode – Spot Focus
You can take a picture with the appropriate focus
automatically for just the point you want to focus
on and with its focus fixed.
(1) Set the POWER switch to CAMERA or
MEMORY/NETWORK (DCR-IP55E only).
(2) Press FN to display PAGE1.
(3) Press SPOT FOCUS. The SPOT FOCUS screen
appears.
(4) Press the desired area in the frame on the
LCD screen.
The SPOT FOCUS indicator flashes on the
LCD screen. When the focus of the point you
selected is adjusted, the 9 indicator appears.
(5) Press
OK to return to PAGE1.
2
FN
To return to FN
Press EXIT.
To return to the autofocus mode
Press AUTO in step 4. The display returns to
PAGE1.
Note
When adjusting Spot Focus, the following modes
do not work:
– Fader
– PROGRAM AE
Focal distance information
It is not displayed on the screen.
(1)
(2)
(3)
(4)
(5)
3-5
SPOT
FOCUS
PAGE1 PAGE2 PAGE3 EXIT
SPOT
FOCUS
MENU FADER END
1 SCH
9
SPOT FOCUS
SPOT
METER
EXPO–
SURE
AUTO OK
89