Basic Configurations; Create A Network Queue Qos Policy - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Basic Configurations

A basic network queue QoS policy must conform to the following:
•
•

Create a Network Queue QoS Policy

Configuring and applying QoS policies other than the default policy is optional. A default network
queue policy is applied to all access uplink ports.
To create an network queue policy, define the following:
•
•
•
Use the following CLI syntax to create a network queue QoS policy:
CLI Syntax: config>qos
Network Queue FC
Network Queue Queue
7210 SAS-E OS Quality of Service Guide
Each network queue QoS policy must have a unique policy name.
Queue parameters can be modified, but not deleted.
Enter a network queue policy name. The system will not dynamically assign a name.
Include a description. The description provides a brief
By default all the FCs are mapped to 8 queues available at the port according to
Forwarding Class to Queue-id Map, on page
network-queue policy-name
description description-string
queue queue-id
rate cir cir-percent [pir pir-percent]
adaptation-rule [cir adaptation-rule] [pir adaptation-
rule]
Network Queue QoS Policies
overview of policy features.
52.
Table 19,
Page 91