Applying Access Egress QoS Policies
Apply access egress policies to the following entities:
•
A policy can be applied to the ports that are in access mode.
Ethernet Ports
Use the following CLI syntax to apply a network queue policy to an Ethernet port:
CLI Syntax: config>port#
The following output displays the port configuration.
*A:card-1>config>port# info
----------------------------------------------
----------------------------------------------
*A:card-1>config>port#
7210 SAS-E OS Quality of Service Guide
Ethernet ports
ethernet access egress
qos access-egress-policy-id
shutdown
ethernet
access
egress
exit
exit
exit
qos 30
Access Egress QoS Policies
Page 163