Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 152

QoS Commands
Egress Port Rate Limiting Commands
frame-based-accounting
Syntax frame-based-accounting
Context configure>qos
Description
This command enables the context to enable frame-based accounting parameters.
egress-enable
Syntax [no] egress-enable
Context config>qos>frame-based-accounting
Description
When configured this command enables the use of ethernet frame overhead bytes [ IFG (12) + pream-
ble(8) = 20 bytes ] in the egress QoS policies that use the queue scheduling rates and egress-rate. It
enables frame based accounting for both network/access uplink egress queue policies and access
egress policies. It enables frame based accounting for all the queues on the all the ports in the system.
The no form of this command disables the use of ethernet frame overhead bytes.
Default no egress-enable
ingress-enable
Syntax [no] ingress-enable
Context config>qos>frame-based-accounting
Description
When configured this command enables the use of ethernet frame overhead bytes [ IFG (12) + pream-
ble (8) = 20 bytes ] for QoS ingress policies that use meters. It enables frame based accounting for ser-
vice ingress policies and for network ingress policies. It enables frame based accounting for all the
meters used in the system.
The no form of this command disables the use of ethernet frame overhead bytes.
Default
no ingress-enable
Page 152 7210 SAS-E OS Quality of Service Guide