Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 140

QoS Commands
multicast-meter
Syntax multicast-meter meter-id
no multicast-meter
Context config>qos>sap-ingress>fc
Context This command overrides the default multicast forwarding type meter mapping for fc fc-name. The
specified meter -id must exist within the policy as a multipoint meter before the mapping can be
made. Once the forwarding class mapping is executed, all multicast traffic on a SAP using this policy
is forwarded using the meter-id.
The multicast forwarding type includes the unknown unicast forwarding type and the broadcast for-
warding type unless each is explicitly defined to a different multipoint meter. When the unknown and
broadcast forwarding types are left as default, they will track the defined meter for the multicast for-
warding type.
The no form of the command sets the multicast forwarding type meter-id back to the default meter for
the forwarding class. If the broadcast and unknown forwarding types were not explicitly defined to a
multipoint meter, they will also be set back to the default multipoint meter (11).
Parameters
meter-id — Specifies an existing multipoint queue defined in the config>qos>sap-ingress context.
unknown-meter
Syntax unknown-meter meter-id
no unknown-meter
Context config>qos>sap-ingress>fc
Description
This command overrides the default unknown unicast forwarding type meter mapping for fc fc-name.
The specified meter-id must exist within the policy as a multipoint meter before the mapping can be
made. Once the forwarding class mapping is executed, all unknown traffic on a SAP using this policy
is forwarded using the meter-id.
The unknown forwarding type usually tracks the multicast forwarding type definition. This command
overrides that default behavior.
The no form of this command sets the unknown forwarding type meter-id back to the default of track-
ing the multicast forwarding type meter mapping.
Parameters meter-id — Specifies an existing multipoint meter defined in the config>qos>sap-ingress context.
Page 140
Values
1 — 18
Default 11
Values
1 — 18
Default
11
7210 SAS-E OS Quality of Service Guide