QoS Commands
pir percent — Defines the percentage of the maximum rate allowed for the queue. When the rate
Page 108
The actual CIR rate is dependent on the queue's adaptation-rule parameters and the actual
hardware where the queue is provisioned.
Values
0 — 100
Default
100
command is executed, the PIR setting is optional. When the rate command has not been
executed, or the PIR parameter is not explicitly specified, the default PIR of 100 is assumed.
Fractional values are not allowed and must be given as a positive integer.
Values
1— 100 percent
7210 SAS-E OS Quality of Service Guide