Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 137

fc
Syntax [no] fc fc-name
Context config>qos>sap-ingress
Description The fc command creates a class instance of the forwarding class fc-name. Once the fc-name is cre-
ated, classification actions can be applied and can be used in match classification criteria.
The no form of the command removes all the explicit queue mappings for fc-name forwarding types.
The queue mappings revert to the default meters for fc-name.
Parameters
fc-name — Specifies the forwarding class name for the queue. The value given for the fc-name must
ip-criteria
Syntax [no] ip-criteria
Context config>qos>sap-ingress
Description IP criteria-based SAP ingress policies are used to select the appropriate ingress meter and correspond-
ing forwarding class for matched traffic.
This command is used to enter the context to create or edit policy entries that specify IP criteria Diff-
Serv code point.
7210 SAS OS implementation will exit on the first match found and execute the actions in accordance
with the accompanying action command. For this reason entries must be sequenced correctly from
most to least explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries
are removed from a SAP ingress policy, the IP criteria is removed from all services where that policy
is applied.
Parameters policy-id — The policy-id that uniquely identifies the policy. Users can specify any entry ID from the
mac-criteria
Syntax [no] mac-criteria
Context config>qos>sap-ingress
Description
The mac-criteria based SAP ingress policies are used to select the appropriate ingress meter and cor-
responding forwarding class for matched traffic.
7210 SAS-E OS Quality of Service Guide
be one of the predefined forwarding classes for the system.
Values
fc:
Default
None (Each class-name must be explicitly defined)
specified range, but the maximum number of entries are restricted to 8.
Values 1 — 65535
class
class: be, l2, af, l1, h2, ef, h1, nc
QoS Commands
Page 137