Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 136

QoS Commands
scope
Syntax scope {exclusive | template}
no scope
Context config>qos>sap-ingress policy-id
Description This command configures the Service Ingress QoS policy scope as exclusive or template.
The no form of this command sets the scope of the policy to the default of template.
Default
template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one
template — When the scope of a policy is defined as template, the policy can be applied to multiple
default-fc
Syntax default-fc fc-name
Context config>qos>sap-ingress
Description
This command configures the default forwarding class for the policy. In the event that an ingress
packet does not match a higher priority (more explicit) classification command, the default forward-
ing class will be associated with the packet. Unless overridden by an explicit forwarding class classi-
fication rule, all packets received on an ingress SAP using this ingress QoS policy will be classified to
the default forwarding class.
The default forwarding class is best effort (be). The default-fc settings are displayed in the show
configuration and save output regardless of inclusion of the detail keyword.
Context
be
Parameters
fc-name — Specify the forwarding class name for the queue. The value given for fc-name must be
Page 136
SAP. If a policy with an exclusive scope is assigned to a second SAP an error message is
generated. If the policy is removed from the exclusive SAP, it will become available for
assignment to another exclusive SAP.
SAPs on the router.
Default QoS policies are configured with template scopes. An error is generated when the
template scope parameter to exclusive scope on default policies is modified.
one of the predefined forwarding classes in the system.
Values
fc:
Default
None
class
class: be, l2, af, l1, h2, ef, h1, nc
7210 SAS-E OS Quality of Service Guide