Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 62

Basic Configurations
Use the following CLI syntax to create a network QoS policy:
CLI Syntax: config>qos#
Network Egress Parameters
Network Ingress Parameters
The following displays the network policy configuration:
A:ALA-10:config>qos>network# info
----------------------------------------------
----------------------------------------------
A:ALA-10config>qos>network#
Page 62
network policy-id
description description-string
scope {exclusive|template}
egress
remarking
fc {be|l2|af|l1|h2|ef|h1|nc}
dot1p-in-profile dot1p-priority
dot1p-out-profile dot1p-priority
ingress
default-action fc {fc-name} profile {in|out}
dot1p dot1p-priority fc {fc-name} profile {in|out}
fc {fc-name}
meter {meter-id}
multicast-meter {id}
meter meter-id [multipoint]
adaptation-rule cir {closest | max | min} pir {clos-
est | max | min}
cbs {size-in-kbits}
mbs {size-in-kbits}
mode {trtcm | srtcm}
rate cir cir-rate-in-kbps [pir pir-rate-in-kbps]
description "Network Qos policy 200"
ingress
meter 1 create
exit
meter 9 multipoint create
exit
exit
egress
remarking
exit
7210 SAS-E OS Quality of Service Guide