Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 109

Show Commands
network-queue
Syntax network-queue [network-queue-policy-name] [detail]
Description
Displays network queue policy information.
Context show>qos
Parameters network-queue-policy-name — The name of the network queue policy.
detail — Includes information about ingress and egress DSCP and LSP EXP bit mappings and
Sample Output
A:ALA-12# show qos network-queue nq1
==============================================================================
QoS Network Queue Policy
==============================================================================
Network Queue Policy (nq1)
------------------------------------------------------------------------------
Policy
Description
------------------------------------------------------------------------------
7210 SAS-E OS Quality of Service Guide
Values Valid names consist of any string up to 32 characters long composed of printable, 7-
bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
network policy interface associations.
Label
Policy
Description
Port-Id
Queue
CIR
PIR
CBS
FC
: nq1
: (Not Specified)
The policy name that uniquely identifies the policy.
A text string that helps identify the policy's context in the configuration
file.
Displays the physical port identifier where the network queue policy is
applied.
Displays the queue ID.
Displays the committed information rate.
Displays the peak information rate.
Displays the committed burst size.
Displays the value of a predefined forwarding class.
Values are: be, l2, af, l1, h2, ef, h1, nc
QoS Commands
Description
Page 109