Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 194

QoS Commands
in the other queues. If the weight is 0 or if the keyword strict is specified in any of the cases, then
that particular queue will be treated as strict. This set of strict priority queues is serviced first in the
order of their CoS numbering (the higher numbered CoS queue receives service before smaller
numbered queues).
The no form of the queue under a WRR/WDRR mode will set the queue weights to default (for
example, 1).
Parameters queue-id — Specifies the queue ID.
strict — Specifies strict access.
weight weight — Specifies the number of packets in case of WRR and ratio of traffic out in WDRR.
Page 194
Values
1 — 8 (8 is the highest)
Values 0 — 15 (0 means strict)
7210 SAS-E OS Quality of Service Guide