Overview - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Overview
Network Queue policies define the egress network queuing for the traffic egressing on the access
uplink ports. Network queue policies are used at the Ethernet port and define the bandwidth
distribution for the various FC traffic egressing on the Ethernet port.
There is one default network queue policy. Each policy always has 8 queues
are shared by unicast and multicast traffic. The default policies can be copied and modified but
they cannot be deleted. The default policy is identified as network-queue default. Default
network queue policies are applied to all access uplink ports. You must explicitly create and then
associate other network queue QoS policies.
For information about the tasks and commands necessary to access the command line interface
and to configure and maintain your devices, refer to CLI Usage chapter in the 7210 SAS E OS
Basic System Configuration Guide.
Page 90 7210 SAS-E OS Quality of Service Guide
.
Each of these queues