Vibration And Noise Reduction - Erbauer EMIS216S Original Instructions Manual

WARNING! The noise emission during actual use of the power tool can
differ from the declared values depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING! Identify safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
Health surveillance
All employees should be part of an employer's health surveillance scheme to help
identity any noise related diseases at an early stage, prevent disease progression and
help employees stay in work.

VIBRATION AND NOISE REDUCTION

To reduce the impact of noise and vibration emission, limit the time of operation,
use low-vibration and low-noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the vibration and noise exposure
risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well
lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer
period of time.
7. Prolonged use of the product exposes the user to vibrations that can cause a range
of conditions collectively known as hand-arm vibration syndrome (HAVS) e.g.
To reduce this risk when using the product, always wear protective gloves and
keep your hands warm.
EN
15