Download
Share
Print this page
Erbauer EMCS650 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Erbauer Manuals
  4. Saw
  5. EMCS650
  6. Original instructions manual

Erbauer EMCS650 Original Instructions Manual

Hide thumbs

Advertisement

Quick Links

EAN: 3663602795841
EMCS650
ORIGINAL INSTRUCTIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the EMCS650 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Erbauer EMCS650

Summary of Contents for Erbauer EMCS650

  • Page 1 EAN: 3663602795841 EMCS650 ORIGINAL INSTRUCTIONS...

  • Page 2: Table Of Contents

    Safety instructions Product description Assembly Care & maintenance Guarantee Declaration of conformity 650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 2 6/4/18 09:19...
  • Page 3 WARNING! Please read all safety warnings carefully and be sure that they are fully understood before handling the tool. 650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 3 6/4/18 09:19...
  • Page 4 Product description 650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 4 6/4/18 09:19...
  • Page 5 650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 5 6/4/18 09:20...
  • Page 6 650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 6 6/4/18 09:20...

  • Page 7: Safety Instructions

    Safety instructions GENERAL POWER TOOL SAFETY WARNING WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • Page 8 b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 9 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times.
  • Page 10 e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Page 11 d) Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable platform. It is important to support the work properly to minimize body exposure, blade binding, or loss of control. e) Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting tool may contact hidden wiring or its own cord.
  • Page 12 a) Maintain a firm grip on the saw and position your arms to resist kickback forces. Position your body to either side of the blade, but not in line with the blade. Kickback could cause the saw to jump backwards, but kickback forces can be controlled by the operator, if proper precautions are taken.
  • Page 13 SAFETY INSTRUCTIONS FOR PLUNGE TYPE SAWS GUARD FUNCTION a) Check guard for proper closing before each use. Do not operate the saw if guard does not move freely and enclose the blade instantly. Never clamp or tie the guard so that the blade is exposed. If saw is accidentally dropped, guard may be bent.
  • Page 14 b) Use only diamond cut-off wheels for your power tool. Just because an accessory can be attached to your power tool, it does not assure safe operation. c) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool.
  • Page 15 i) Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and shop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations.
  • Page 16 materials. Sparks could ignite these materials. q) Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock. SAFETY INSTRUCTIONS FOR LASER LASER λ=650nm P ≤1mW EN60825-1:2014 a) Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into the beam.
  • Page 17 GENERAL SAFETY WARNINGS FOR BATTERIES a) CAUTION: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. Observe correct polarity. b) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
  • Page 18 g) Double check that the accessories and attachments are properly fixed. One minute testing running in no- load condition will be helpful to identify any problems. h) Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
  • Page 19 The following information applies to professional users only but is good practice for all users: ADDITIONAL SAFETY WARNINGS FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts. Construction workers are one of the at-risk groups within this because of the dust that they breathe: silica dust is not just a nuisance;...
  • Page 20 How to reduce the amount of dust? 1. Reduce the amount of cutting by using the best sizes of building products. 2. Use a less powerful tool e.g. a block cutter instead of angle grinder. 3. Using a different method of work altogether – e.g. using a nail gun to direct fasten cable trays instead of drilling holes first.
  • Page 21 VIBRATION The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
  • Page 22 WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
  • Page 23 3. Use correct attachments for the product and ensure they are in good condition. 4. Keep tight grip on the handles/grip surface. 5. Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate). 6. Plan your work schedule to spread any high vibration tool use across a longer period of time.

  • Page 24: Product Description

    Product description Part index The index below refers to Fig. 1 on page 4. 1. Main handle 11. Cutting depth scale 2. On/off switch 12. TCT saw blade (for wood) 3. Safety lock switch 13. HSS blade (for wood and metal) 4.
  • Page 25 Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. This product is of protection class II. That means it is equipped with enhanced or double insulation. The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
  • Page 26 Rating label explanation EMCS650 = Model number E = Erbauer MCS = Mini circular saw 650= Power (Watts) 650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 26 6/4/18 09:20...

  • Page 27: Assembly

    Assembly Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices, if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
  • Page 28 Saw/diamond blade (Fig. A, B, C, D, E) WARNING! Always use blades according to the intended use! For example, never use a saw blade intended for working on wood for working on metal/tiles or vice versa! Observe the technical specifications of this product and the saw/diamond blades when purchasing and using blades! Attachments are sharp and hot after use! Handle them with care! Wear safety gloves when handling attachments to avoid injuries like burns and...
  • Page 29 8. Release the spindle locking button, remove the hex key and turn the saw/diamond blade by hand to check if it rotates smoothly. The blade should not flutter. 9. Switch the product on and let it run at no-load speed for about one minute to ensure that the saw/diamond blade has been installed properly.

  • Page 30: Use

    Intended use The product is intended for longitudinal and plunge cutting on solid wood, wood-like materials, metal and mineral materials (e.g. tiles) when equipped with appropriate saw blades / diamond cutting wheels. For safety reasons it is essential to read the entire instruction manual before first operation and to observe all the instructions therein.
  • Page 31 1. Open the depth clamping lever (9) by hand. 2. Raise/lower the depth clamping lever (9) and set the blade to the required depth as shown on the cutting depth scale (11). 3. Lock the depth clamping lever (9). Laser (Fig. I) Use the laser as guide when cutting on marked lines.
  • Page 32 Operation Cutting wood WARNING! During operation fine dust will be generated! The dust is highly inflammable and explosive! Do not smoke during operation, keep heat sources and open flames out of the working area! Always wear a dust mask to protect yourself against hazards resulting from fine dust! Take the cutting channel into consideration when cutting along marked cutting lines.
  • Page 33 12. Keep the product moving at all times, do not stop in one position to avoid grooves. 13. Lift the product from the workpiece before switching it off.. Cutting metal The product can be used for cutting metal, e.g. brass, copper, aluminium or galvanised mild steel.

  • Page 34: Care & Maintenance

    Care & maintenance WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! Only perform care and maintenance work according to these instructions! All further works must be performed by a qualified specialist! Clean 1.
  • Page 35 Power cord If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. UK plug (only for UK market) Replacement of the plug shall always be carried out by the manufacturer of the tool or his service organization and follow the instructions below.
  • Page 36 Transportation WARNING! Always carry the product by its main handle. Never use the cord for carrying the product. 1. Switch the product off and disconnect it from the power supply. 2. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.

  • Page 37: Guarantee

    Guarantee At Erbauer we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. We carry out stringent testing procedures on all our tools and are confident that they can provide regular, sustained daily use during the period covered.

  • Page 38: Declaration Of Conformity

    London W2 6PX United Kingdom Declare that the product 650W Mini circular saw EMCS650 Serial number: from 000001 to 999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive References to the following harmonized standard were made:...
  • Page 39 Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands Declare that the product 650W Mini circular saw EMCS650 Serial number: from 000001 to 999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive References to the following harmonized standard were made:...
  • Page 40 Manufacturer • Fabricant • Producent • Producator • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands Distributor: www.diy.com www.screwfix.com www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...

This manual is also suitable for:

3663602795841