Table of Contents
Advertisement
EN
The product can be used with the dust collection bag (5) or an external dust extraction
device.
Dust collection bag
1. Attach the dust collection bag (5) to the dust extraction outlet (41) (Fig. G).
2. Pull the dust collection bag off to remove it from the appliance.
3. To empty the dust collection box, open the bag by pulling out the sealing slot (5a)
(Fig. H).
External dust extraction device
Attach a proper dust extraction device, e.g. a suitable vacuum cleaner attachment
(Ø35 mm) to the dust extraction outlet (41) (Fig. I).
Use
Intended use
This product is intended as a stationary machine for making straight lengthways and
crossways cuts in wood and materials that are similar to wood (e. g. plywood, MDF
and chipboard).
This product should not be used on other materials or those harmful to health. It is to
be used for dry operation only without water or other cooling liquids.
operation and to observe all the instructions therein.
Before you start
01
Protection
24
Hide quick links:
Advertisement
Table of Contents
