Symbols - Erbauer EMIS216S Original Instructions Manual

21. Mitre angle adjustment lever
22. Bevel angle locking lever
23. Turntable
24. Locking bolt
25. LED light*
26. Spindle locking button
27. Right safety lock button
28. On/off switch
29. Left safety lock button
30.
31. Laser*
Parts marked with * are not shown in this overview. Please refer to the
respective section in the instruction manual.

Symbols

the following symbols and abbreviations. Familiarise yourself with them to reduce
hazards like personal injuries and damage to property.
Always wear eye protection.
Wear a dust mask.
Lock / to tighten or secure.
Note / Remark.
Laser radiation.
dB(A) Decibel (A-rated)
Keep your hands away!
Blade for cutting wood.
To reduce the risk of injury, user must read instruction manual.
32. Lower retractable blade guard
33. Guard mounting plate*
34. Saw blade*
35. Cutting depth gauge
36. Sliding bar
37. Fence locking lever (left & right)
38. Workpiece clamp holder
(left & right)
39. Base
40. Bevel angle locking knob
41. Dust extraction outlet
Always wear ear protection.
Wear protective gloves.
Unlock / to loosen.
Caution / Warning.
Do not stare into beam.
n No-load speed
0
EN
17