Delivery And Limited Warranty Registration Form - Progressive Turf Equipment Slope-Pro Operator's Manual

IMPORTANT: DEALER MUST COMPLETE AND MAKE A COPY OF THIS FORM AND SUBMIT TO PROGRESSIVE
TURF EQUIPMENT WITHIN 5 DAYS OF DELIVERING THE EQUIPMENT TO VALIDATE WARRANTY.
Mail or fax to: PO Box 940, Seaforth, Ontario Canada N0K1W0 Fax: (519)527-2275
Machine Serial Number
Identification
Dealer
Branch Location
Company Name
Address
City
State / Province
ZIP / Postal Code
Pre-Delivery Check List – Performed by qualified Dealer representative for authorized Customer's representative.
Ensure Operator's Manual is stored within
manual container
Verify that all safety decals are legible
Check engine oil level
Check fuel level and tank security (both)
Check cooling area
Check air cleaner and connections
Check drive belts
Authorized Customer Representative: please initial beside the following boxes, when the item(s) are demonstrated to you and only after
Showed location of and reviewed Operator's Manual
and the limited warranty information, terms and
Understand the Warning, Danger and Caution
notifications identified in the warning decals and
Operator's Manual
Instructed on all functions of the remote control,
including initial control communication and
identification of all functions
Instructed on the proper starting, shut down and
emergency stop operation
As an authorized representative of the Customer, I hereby acknowledge acceptance of the above machine and that the machine was
verified against the above check list. I have read and understood the nature and extent of the limited warranty information provided. I have
been advised on and understand the proper operation, safety procedures, maintenance requirements, limitations and capabilities of this
Authorized Customer Representative
Print

DELIVERY AND LIMITED WARRANTY REGISTRATION FORM

SLOPE-PRO
Hour Meter
Reading
Refer to the Slope–Pro machine Operator's Manual for detailed instructions
®
you fully understand the operation and / or significance of each item:
conditions
equipment for which it was designed and described in the Operator's Manual.
MACHINE INFORMATION
®
Date Delivered
Authorized Dealer
Training
Representative
CUSTOMER
Email
Phone
Fax
Authorized
Customer
Representative
Check hydraulic tank level
Check tracks
Check height adjustment
Verify that PTO clutch functions correctly
Verify mower blades, spindles are in good
condition and properly secured
Verify that hoods and guards are in good condition
and in place
Instructed on the forward and reverse movement
and left and right steering functions
Engagement and disengagement of the mower
blades and cutting height adjustment
Understand the potential dangers of remote control
vehicle operation as identified in but not limited to
scenarios listed in the Operator's Manual
Instructed on the maintenance requirements as
identified in the Operator's Manual
Signature
yyyy/mm/dd
Print
Signature
Print
Signature
DATE
yyyy/mm/dd