Progressive Turf Equipment Slope-Pro Operator's Manual page 24

Controls Operator's Manual
®
Slope-Pro
10. Engine Start / Stop (self-centering)
Push the control switch forward and hold to start the engine. Pull it
rearward to stop the engine.
11. Throttle Up / Down (self-centering)
Push the control switch forward to raise engine speed (work mode). Pull
the switch rearward to lower engine speed.
12. Emergency Stop
Depress this button to kill the engine in an emergency. An emergency
stop button is also located on the control panel on the machine. Rotate
clockwise to release.
13. PTO On / Off
This control switch engages the power take-off (PTO) to power the
mower blades. Push the control switch forward to engage the mower
deck (On). Pull the control switch rearward to disengage the mower (Off).
*Note – The PTO switch must be in the "Off" position to initiate a
"handshake" between the machine and remote.
14. Cruise Hold On / Off
Use this switch to set and maintain the mowing speed. Use the
directional control lever (4) to set the machine in motion. Once the
desired cutting speed is reached, push this control lever forward to lock
the speed.
Switch Cruise Hold to OFF to release.
15. Range Low / High (Work / Travel)
This control switch sets the speed range of the machine in either high or
low range. Push the lever forward for high-speed (travel) range. Pull the
control lever rearward for low speed (work) range.
20