Direction References; Machine Specifications - Progressive Turf Equipment Slope-Pro Operator's Manual

Operator's Manual
®
Slope-Pro

Direction References

Throughout this manual, references are made to left-hand and right-hand
directions. All directions are indicated with the operator standing at the
rear of the machine facing the direction of forward travel.

Machine Specifications

Engine
Travel Speeds
Traction Drive
Cutting Deck Drive
Cutting System
Cutting Height
Working Width
Tracks
Remote Control
Fuel Tanks
Dimensions
Weight
– Kohler Command-Pro EFI Engine - 747cc
– Infinitely variable up to 4.3 mph
– Two variable displacement axial piston pumps
– Two fixed displacement cam-lobe radial piston
motors
– Two spring-apply / hydraulic release multi-disc
brakes
– Belts and electric clutch
– Two-blade rotary
– Maintenance-free spindles
– 2.25 – 8 in
– 52 in
– Turf Friendly – 9 in wide X 48 in ground contact
– Remote control of all machine functions
– 300 foot recommended maximum operating range
– Internal switch stops engine and drive, and applies
brakes when remote control is tilted more than 45°
fore/aft or side to side
– Controller-Compact M2 receiver. 7.2V
rechargeable
– Two removable 3.2 gal with sight level gauges
and quick-disconnect lines
78 in Wide X 80 in Long X 38.75–44.5 in High
2830 lb
General Information
17