Progressive Turf Equipment Slope-Pro Operator's Manual page 57

Operator's Manual
®
Slope-Pro Troubleshooting Guide
Check oil cooler for debris build-up that can restrict air flow through core.
Clean core with compressed air if required.
Check hydraulic oil level in reservoir and add the correct amount and
type of hydraulic oil, if necessary.
Check the quality of the oil; change if milky, dirty or discolored. Also
smell the oil. A burnt odor indicates excessive heat that will destroy the
lubricating qualities of the oil. Again, the oil should be changed if this
condition is found. Determine the cause of the excessive heat and
correct it.
Determine if the return filter is plugged or damaged. A filter that has
failed will permit oil to bypass the system, affecting system operation and
tests. If the filter is plugged, examine the contamination to determine
what may have caused the failure.
53