Maintenance
Inspect Drive Belt Tension – Pump Drive
Access this drive belt (1) by removing the cover on the right-hand side of
the machine.
▪
Ensure the engine is off and the machine is blocked to prevent
movement.
▪
Loosen the two pivot bolts (2).
▪
Loosen lock nut (4) and jam nut (3).
▪
Adjust drive belt tension to the prescribed amount by turning the hex
bolt (5).
▪
Tighten locknut (4), jam nut (3), and then the two pivot bolts (2).
Adjust Drive Belt Tension – PTO Drive
Access this drive belt (1) under the hood on the left-hand side of the
machine.
▪
Ensure the engine is off and the machine is blocked to prevent
movement.
▪
Loosen the four securing bolts (2).
▪
Loosen jam nut (4) and adjust belt tension by turning hex nut (3).
▪
Tighten the two securing bolts (2), tighten jam nut (4).
Gearbox Drive Belt Tension
The gearbox drive belt has a self-tensioner and requires no adjustment.
Ensure tensioner arm moves freely, tensioner pulley is aligned with belt
and tensioner spring is in good condition
46
Operator's Manual
®
Slope-Pro