Progressive Turf Equipment Slope-Pro Operator's Manual page 23

Controls
Operator's Manual
®
Slope-Pro
4. Direction Control (self-centering)
Push forward on the control lever for forward travel. Pull rearward for
reverse travel. The further the lever is pushed, the faster the machine will
travel. When the desired speed is reached, set the cruise ON. See item
14 Cruise Hold On/Off.
5. Bias Control
This control keeps the machine running straight when encountering
different traction conditions from one track to the other. If traction is lost
on one side, the machine will turn in that direction. Turn the dial
clockwise to increase right-hand track speed. Turn the dial counter-
clockwise to increase the left-hand track speed.
6. Steering Control (self-centering)
Push the control lever to the left for left-hand turns. Push the control
lever to the right for right-hand turns. The farther the lever is pushed, the
more aggressive the turn will be. Pushing the lever fully left or right will
allow a full turn on the spot.
7. Frequency Indicator Lamp
Indicates the radio frequency for the remote control. During operation,
the red lamp flashes to indicate normal operation. For more information,
refer to the remote control operator's manual.
8. Enable / Horn (self-centering)
This switch synchronizes the wireless signal between the remote control
and the receiver on the machine. Push the control switch forward to
initiate a "handshake" between the two and the horn will sound when
communication is established.
After synchronization this switch activates the horn at any time.
9. Frequency (self-centering)
®
The Slope-Pro machine's remote control can operate on 50 different
radio frequencies. This permits the safe usage of multiple machines on a
single work site. Refer to the Remote Control manual for more
information. For information on changing frequency, see Page 38.
19