Using Booster Battery; Cleaning - Progressive Turf Equipment Slope-Pro Operator's Manual

Maintenance
▪
Both blades use two 1/2 in X 1 3/4 lg. Grade 5 bolts with lock
washers and nuts to hold blade to blade spindle support bar. When
changing blades, be sure that these fasteners are in good condition
and tightened to the proper specification (85ft-lbs) so they will not
come loose during operation.

Using Booster Battery

Explosive gases. No smoking. Keep sparks and flames away
from batteries.
In the event that the machine battery has become discharged and must be
started in short order a booster battery may be used.
Boost terminals are proved under the hood to facilitate boost starting using
appropriate booster cables.
▪
Connect positive (+) post of boost battery to positive (+) boost
terminal on machine.
▪
Connect negative (-) post of boost battery to negative (-) boost
terminal on machine.
▪
Start machine and allow to run for several minutes.
▪
Carefully disconnect cables in the reverse order.

Cleaning

IMPORTANT! If using a power washer to clean the machine, be
careful of electrical system components. Do not use a power
washer on the control panel or the remote control. Damage to
sensitive electronics could occur causing a system malfunction.
Warning decals are placed on the machine in these locations.
50
Operator's Manual
®
Slope-Pro