Items Included With The Slope-Pro® Machine; Serial Number Location; Parts Information - Progressive Turf Equipment Slope-Pro Operator's Manual

Introduction
Items Included with the Slope–Pro® machine
▪ machine Operator's Manual
®
Slope–Pro
▪ Nbb Operator's Manual for remote control / transmitter
▪
Kohler Engine Manual
▪
Machine parts book
▪
Remote control / transmitter
▪
Battery charger for remote control / transmitter
▪
Tool kit (tension release wrench, grease gun, blade balancer tool)
▪
Brake release tools (two of each: tube, bolt and nut)

Serial Number Location

The serial number plate for the machine is located on the left-hand rear frame.
For quick reference, record the following information:
Model: _________________________________________________
Serial Number: __________________________________________
Date purchased: _________________________________________
Always state this information when contacting your selling dealer and when
ordering spare parts.

Parts Information

Use only Genuine Original Equipment Manufacturers (O.E.M.) replacement
parts. The use of "will fit" parts may reduce machine performance, void machine warranties and present a safety
hazard. Use Genuine OEM parts.
Operating, servicing and maintaining this equipment can expose you to chemicals
including engine exhaust, carbon monoxide and lead, which are known to the State of
California to cause cancer and birth defects or other reproductive harm.
To minimize exposure, avoid breathing engine exhaust, do not idle the engine more than
necessary, service equipment in a well-ventilated area and wear gloves or wash your
hands frequently when servicing the equipment.
2
For more information go to www.P65Warnings.ca.gov
Operator's Manual
®
Slope-Pro