Operator's Manual
®
Slope-Pro
Mower Operation
▪
Do not exceed mower's rated cutting capacity or cut non-
vegetative material.
▪
Adjust cutting height to AVOID BLADE CONTACT with solid
objects like wire, rocks, posts, curbs, guard rails and fixed
obstructions.
▪
Do not travel or transporting between work sites with the blade
PTO engaged.
▪
STOP MOWING immediately if blades strike heavy objects, fixed
structures, metal guard rails and concrete structures:
▪
Blades can fail from poor maintenance practices and objects can
be thrown with great velocity.
▪
Inspect and replace any damaged blades.
▪
Check blade bar and spindle for any damage.
▪
Do not mow in standing water
▪
Stop mowing when EXCESSIVE VIBRATION occurs:
▪
Stop mower blades and engine
▪
When it is safe to do so, inspect mower for vibration source
▪
Replace any damaged parts and bent or damaged blades
To avoid serious injury or death from equipment run over:
▪
Never allow riders on the machine.
▪
Never ride on the machine.
▪
Never stand in the path of the machine
▪
Never stand below or down slope of the machine as it could slide
or roll on top of you.
▪
Never stand directly upslope of the machine, make sure your
footing is stable and solid to prevent slipping of falling into the path
of the machine.
▪
Do not operate the machine in areas where you cannot clearly see
in front of the machine path. Failure to see a bystander, drop-off or
obstruction could result in serious injury or death.
▪
Only start and operate the machine with the remote control
properly fitted to the operator.
▪
Immediately stop and shut down the machine if a bystander comes
within 300 feet of the machine.
▪
Never operate the machine towards motor vehicle traffic. Mow in a
direction parallel to vehicle traffic.
Safety Precautions
9