Progressive Turf Equipment Slope-Pro Operator's Manual page 29

Operator's Manual
®
Slope-Pro
8. Mower Blades and Spindles
Check the mower blades, spindles and the underside of the deck.
Replace any blade that is bent, excessively nicked, worn or has any
other damage. Small nicks can be ground out when sharpening.
▪
Make sure blades are tight and in good condition.
▪
Clean any debris from these areas.
▪
When replacing mower blades, be aware of blade rotation as
blades rotate in opposite directions. Ensure the cutting edge is
facing in the correct direction
▪
When viewed from above and per machine orientation as
identified on page 17, the left hand blade turns clockwise.
▪
When viewed from above and per machine orientation as
identified on page 17, the right hand blade turns counter
clockwise.
▪
Always ensure blades are balanced. Refer to page 49
9. Hoods, Covers
Check that all hoods and covers are in place and in good condition.
▪
Check thrown object deflectors on front and rear of mower and
ensure they are free to move and naturally hang down without
any binding.
▪
Check all hoods and covers for loose parts or damage.
▪
Ensure that hood strut lock functions correctly
▪
Do not rely on the hood strut lock to secure the hood in the
open position if mower positioned on a slope or if the hood is
opened during high or gusty winds.
Check All Fasteners
Ensure all fasteners are present and properly tightened.
Pre-start Instructions
25