Applying The Grease - Canon W6200 Service Manual

Part 5: Maintenance

3. APPLYING THE GREASE

Apply the grease at the location shown below.
Smear the grease lightly and evenly with a flat brush.
Part 5: 5. DISASSEMBLY/REASSEMBLY
See
disassembling the printer.
CAUTION
Lock pin :
Permalub G No.2 approx. 12mg
Don't apply the grease to locations other than those designated. Unwanted
grease may cause poor print quality, take particular care that grease does
not get onto the wiper, cap, or the linear scale.
Plate spring : Permalub G No.2
approx. 12mg
Joint :
Molykote PG-641 approx. 24mg
Figure 5-2 Applying the grase of carriage
Figure 5-3 Applying the grease of pinch roller unit
and the Parts Catalog for reassembling and
Cam : Permalub G No.2
approx. 12mg
Permalube G No.2
approx. 24mg
5-4
W6200