2.3.3 Replacing the maintenance cartridge
When the maintenance cartridge detects that tank is full, the "Replace MT cartridge"
error appears. In this case the maintenance cartridge must be replaced.
The printer will not operate until the error is canceled.
Be careful that the waste ink does not splash when you remove the used maintenance
cartridge from the printer.
2.3.4 Refilling the ink
After removing the ink in the printer according to the automatic or manual ink
draining procedure to disassemble, reassemble, or transport/ship the printer, refill
the ink as soon as possible upon completion of those tasks.
If the ink remaining in the printer after the removal has dried up, the ink deposits on
the surfaces of the components may cause damage or abnormal operation.
This printer has an EEPROM in the maintenance cartridge and the
maintenance cartridge status is controlled by the engine firmware which
reads and writes the content of that EEPROM. Therefore, the counter
information need not be initialized when the maintenance cartridge is
Part 1: Safety and Precautions