Canon W6200 Service Manual page 209

W6200
c) Manual ink drainage procedure
Step 1
1) Remove the right cover. For details, refer to
2) Remove the ink tank.
3) Remove the joints for the ink tube unit and ink tank unit. For details, refer to
5: 5.2.10 Ink tank
4) Place the joint for the ink tube unit side in the ink flow path at the back of the ink
tank unit.
5) Move the carriage over the platen. For details, refer to
and Moving the Wiper
6) Unlock the printhead lock lever to allow all the ink for all six colors in the ink
tubes to flow simultaneously to the maintenance cartridge.
Step 2
7) Connect the syringe ink tube to the needle of the subbuffer. Pull the plunger of
the syringe to remove the ink inside the sub buffer and discard to the maintenance
cartridge. Repeat until there is no more ink left.
8) Open the ink supply valve. For details, refer to
Ink Supply
9) Connect the syringe ink tube to the supply side needle. Pull the plunger of the
syringe to remove the ink inside the ink supply unit and discard to the
maintenance cartridge. Repeat until there is no more ink left.
unit.
Unit.
Valve.
Figure 5-44 Top View of Ink Tank Unit
Part 5: 5.2.4 Outer
Part 5: 5.3 Opening the Caps
Part 5: 5.4 Opening and Closing the
Ink supply side needle
Subbuffer side needle
5-41
Part 5: Maintenance
covers.
Part