Canon W6200 Service Manual page 203

W6200
2) Install the new lithium battery.
Model no. : CR2032
3) Enter the current time and date.
CAUTION
3-1) While holding down the [Online] button and [Paper source] button, turn on
the power switch.
3-2) Go to main menu and select SERVICE MODE then RTC INFO.
This displays the current time and date.
3-3) Enter the current year (last two digits) with the [<] or [>] button and press the
[ ] or [Enter] button.
3-4) Enter the current month with the [<] or [>] button and press the [ ] or [Enter]
button.
3-5) Enter the current date with the [<] or [>] button and press the [ ] or [Enter]
button.
3-6) Enter the current hour (0 to 24) with the [<] or [>] button and press the [ ] or
[Enter] button.
3-7) Enter the current minute with the [<] or [>] button and press the [ ] or [Enter]
button.
3-8) Complete the setting by pressing either the [Online] button or the [ ] button.
3-9) Cycle the power supply off, then restart the printer in Normal mode.
Always make sure to restart the system in Normal mode after entering the
new RTC setting, otherwise the new setting will not be validated.
5-35
Part 5: Maintenance