Canon W6200 Service Manual page 95

Part 3: Operations
31) E02815
Check MT-Cart.
This is displayed when there is an error in the maintenance cartridge EEPROM.
32) E02816
Check MT-Cart.
This is displayed when a maintenance cartridge used on another printer is installed.
33) E02817
No MT-Cartridge
This is displayed when no maintenance cartridge is installed.
34) E02818
Replace MT-Cart.
This is displayed when maintenance cartridge tank full is detected.
35) E02A00
Turn Power Off!!
This is displayed when an error occurs in the firmware of the engine controller.
36) E02A01/E02A02/E02A03
Turn Power Off!!
This is displayed when an error occurs in the FLASH ROM of the engine controller.
37) E02B04
Close Upper Cover
This is displayed when the upper cover sensor has detected that the upper cover is
open while the upper cover is locked.
38) E02B05
Close Right Cover
This is displayed when the right cover sensor has detected that the right cover is
opened when the right cover is locked.
39) E02B06
Close CRG Cover
This is displayed when the right cover sensor has detected that the right cover is
opened when the right cover is locked.
40) E02B07
Close Right Cover
This is displayed when the right cover sensor detects that the right cover is opened.
41) E02D00/E02D01
Turn Power Off!!
This is displayed when sensors for the purge unit could not detect the positions of
the motors within the prescribed time.
42) E02D02
Turn Power Off!!
This is displayed when the carriage homeposition sensor could not detect the home
position of the carriage motor within the prescribed time.
3-48
W6200