Carriage Unit - Canon W6200 Service Manual

W6200

5.2.7 Carriage unit

a) Removing the carriage unit
1) Drain the ink. For details, refer to
2) Turn off the power, and then move the carriage over the platen. For details, refer
Part 5: 5.3 Opening the Caps and Moving the Wiper
to
3) Remove the holder cover and tube holder.
4) Remove the printhead.
5) Remove all the connectors on the carriage relay PCB.
6) Remove the printhead lock lever.
7) Wrap the printhead side joint on the ink tube unit with a plastic bag or other
covering so that no ink splashes or leaks, then close the plastic bag.
Part 5: 5.5 Draining the
Figure 5-27 Prevention of ink leaks
5-25
Part 5: Maintenance
Ink.
Unit.
Printhead side