Service Information Access Procedure - Canon W6200 Service Manual

W6200

6.4.1 Service information access procedure

1) Connect the printer and computer with a serial cable, and then turn on the
printer.
2) Check that the printer is in the Online or Offline mode, and then start the
computer.
3) At the Run command of the start menu, enter "hypertrm.exe", and then click OK.
Figure 3-39 Service Information Access Software (Startup 1)
4) Enter the name, select the icon, and then click OK.
Figure 3-40 Service Information Access Software (Startup 2)
3-59
Part 3: Operations