Adjustment And Setup; Adjustment And Setup Items; Adjustment Of Head Holder Tilt Lever; Adjustment And Setup Procedures - Canon W6200 Service Manual

W6200

6. ADJUSTMENT AND SETUP

6.1 Adjustment and Setup Items

6.1.1 Adjustment of head holder tilt lever

This procedure is performed when the edge sections of the image are not sharp when
printing in Draft mode (2-pass).

6.2 Adjustment and Setup Procedures

6.2.1 Adjustment of the head holder tilt lever

This adjustment is performed when the edge sections of the image are not sharp when
printing in Draft mode (2-pass).
After adjusting the head holder tilt lever, mark the number visible from the window of
the head holder tilt lever with the number inside the sensor cover.
Sensor cover
3 2 1 0 -1 -2 -3
Mark
Figure 5-46 Adjusting the Head Holder Tilt Lever
Head holder tilt lever
5-43
Part 5: Maintenance