Memory Overflow (W0100C); Feed Limit; (W0100F) Incorrect Media; Incorrect Media (W01021) - Canon W6200 Service Manual

Part 5: Maintenance
7.2.3 Memory Overflow
(W0100C)
<Cause>
This is displayed when a data fault occurs due to insufficient memory.
<Probable problem locations>
Operation error, system controller
<Remedy>
1.Check the operating procedure and transmit data.
2.Replace the system controller.
7.2.4

Feed Limit..

(W0100F)
<Cause>
This is displayed when the engine controller has detected the feed limit of the media
during manual feeding.
During back feeding, the print standby position (on feed roller) is the feed limit.
During forward feeding, the feed sensor detects no roll media.
<Probable problem locations>
Engine controller, system controller
<Remedy>
1.Replace the engine controller.
2.Replace the system controller.
7.2.5 Incorrect Media
(W01021)
<Cause>
During data reception, this is displayed when the media type required by the
received data is different from the media type that is currently loaded.
<Probable problem locations>
Operation error, engine controller, system controller
<Remedy>
1.Check the operating procedures and reprint.
2.Replace the engine controller.
3.Replace the system controller.
5-46
W6200