Reinstalling The Printer; Installing The Printer On The Same Floor; Installing The Printer On A Different Floor - Canon W6200 Service Manual

W6200

2.2 Reinstalling the Printer

2.2.1 Installing the printer on the same floor

If ink has not been drained from the printer when moving it to another place on the
same floor, then an operation check (Test Print) needs to be performed after the
printer is moved to a new location.

2.2.2 Installing the printer on a different floor

If ink has been drained when transporting the printer to a different floor, follow the
installation procedure below. It is nearly identical to the procedure when installing for
the first time.
1) Unpack the printer, and mount the printer on a stand if a stand is included.
2) Remove the cushioning materials and tape.
3) Reattach the maintenance cartridge.
4) Remove the belt stopper.
5) Connect the power cord and ground wire.
6) Turn on the power and following the instruction in the message to install the ink
tank. The ink is filled.
7) Load the media, and perform the operation check.
3-9
Part 3: Operations