Service Tools; List Of Tools - Canon W6200 Service Manual

Part 5: Maintenance

2. SERVICE TOOLS

2.1 List of Tools

General-purpose tools
Long Phillips screwdriver
Phillips screwdriver
Flat-head screwdriver
(small)
Needle-nose pliers
Hex key wrench
Penlight
Multimeter
Flat brush
Lint free paper
Rubber gloves
LAN cable
(Crossover cable)
RS-232C cable
(9-pin, male, crossover cable)
Special-purpose tools
Cover switch tool
(QY9-0103-000)
Syringe
(CK-0541-000)
Tube
(QA2-6161-000)
Grease PERMALUBE G-2
(CK-0551-020)
Grease MOLYKOTE PG-641
(CK-0562-020)
Firmware
updating tool
(CNWFUT01.exe*
Firmware
recovery tool
(com_fut.exe)
*1 : Usage period is limited.
Inserting and removing screws
Inserting and removing screws
Removing the E-ring
Inserting and removing the spring parts
Inserting and removing hexagonal screws
Assisting in the manual capping procedure
Troubleshooting
Applying grease
Wiping off ink
Preventing ink stains
For upgrading the firmware version
For obtaining service information
Pressing the cover switch
Part5: 2.2 Using the Cover Switch
(see
Draining the ink manually
(see Part5: 5.5.2 Manual ink
Draining the ink manually
(see Part5: 5.5.2 Manual ink
Applying to specified locations
(see Part5: 3. APPLYING THE
Applying to specified locations
Part5: 3. APPLYING THE
(see
For upgrading the firmware.
Part3: 6. PRINTER SERVICE
(see
1 )
For recovering the boot firmware of System controller.
Part3: 6. PRINTER SERVICE
(see
5-2
Application
Application
Tool)
drainage)
drainage)
GREASE)
GREASE)
SOFTWARE)
SOFTWARE)
W6200